Fiore Skirt Pattern

£20.00

Part of the Rome Collection, the Fiore Skirt is a chic, high waisted A -line skirt with just the right amount of flare and volume. A beginner-friendly pattern with multiple variations, this elevated basic has tons of outfit potential. Available in above or below the knee lengths, the Fiore Skirt has three views. View A is a simple flared skirt with an invisible zipper at the back. View B is an asymmetrical wrap skirt with single hip pocket. View C buttons up the front with curved patch pockets.

In stock

Description

SUGGESTED FABRIC
All views can be made with crisp wovens such as linen, chambray, denim, twill, poplin, lightweight canvas, and structured cottons. Please note: Views A and B can also be made with drapier fabrics like rayon challis, tencel, or silk, but the patch pocket for View C should not be sewn with fluid fabrics.

 

YARDAGE REQUIREMENTS (45″/1.14M FABRIC)
View A
0-8 = 1.75yd / 1.6m, 10-14 = 2yd / 1.85m, 16-20 = 2.25 yd / 2m

 

View B
0-8 = 2.25yd / 2m, 10-14 = 2.5yd / 2.25m, 16-20 = 2.75yd/2.5m

 

View C
0-8 = 2.25yd / 2m, 10-14 = 2.5yd / 2.25m, 16-20 = 2.75yd/2.5m

 

YARDAGE REQUIREMENTS (58″/1.5M FABRIC)
View A
0-20 = 1.5yd / 1.4m

 

View B
0-8 = 1.75yd / 1.6m, 10-20 = 2yd / 1.85m

 

View C
0-8 = 1.5yd / 1.4m, 10-20 = 1.75yd / 1.6m

 

ADDITIONAL SUPPLIES
Lightweight non-stretch fusible interfacing (1.25 yd / 1.1m)
View A = 7” (18cm) invisible zipper View B = 2 x buttons – 1/2” – 3/4” (13-19mm)
View B = scrap of 1/4” (6mm) twill tape or ribbon for loop closure (optional)
View C = 6-8 buttons – 1/2” (13mm)
Views B & C: Fray Stop & buttonhole chisel or seam ripper to open buttonholes
Polyester thread

There are no reviews yet.

Be the first to review “Fiore Skirt Pattern”