Daisy designer Tunic Sewing Pattern by Style Arc

1 customer review

£16.00

Daisy Designer Tunic Sewing Pattern; The symmetrical double angled hemlines give this simple tunic a designer look – available in 2 sizes

Description

DAISY DESIGNER TUNIC SEWING PATTERN

The symmetrical double angled hemlines give this simple tunic a designer look. Choose your season, make it sleeveless or with a fashionable three-quarter sleeve. The inseam pockets are optional and the neck line is faced and can be top stitched using a contrast colour thread.

FABRIC CHOICES

We Recommend Sewing this product in linens, fine lawns or cotton poplins.

MAIN FABRIC ESTIMATE

Fabric Width Sizes 4 – 12 Sizes 14 – 20 Sizes 22 – 30
140 cm / 55 in 230 cm / 2.5 yards 260 cm / 2.9 yards 300 cm / 3.3 yards

SIZING

SIZE A. SHOULDER BREADTH (CM) B. UPPER ARM GIRTH (CM) C. BUST (CM) D. WAIST (CM) E. HIP (CM)
4 34.4 26.4 77 60 83
6 35.6 27.6 82 65 88
8 36.8 28.8 87 70 93
10 38 30 92 75 98
12 39.2 31.2 97 80 103
14 40.4 32.4 102 85 108
16 41.6 33.6 107 90 113
18 42.8 34.8 112 95 118
20 44 36 118 100 124
22 45.2 37.2 124 106 130
24 46.4 38.4 130 112 136
26 47.6 39.6 136 118 142
28 48.8 40.8 142 124 148
30 50 42 148 130 154

How Do I Know What Size I Am?

Choosing your pattern size is the most important step and we will help you determine this with these easy to follow steps.

  1. When taking your measurements ensure that you take them against your skin and not over clothing. One can wear a comfortable bra and knickers whilst measuring, as this will provide you with the most accurate measurements.
  2. Tape measure has to sit firmly around the points you are measuring. But be careful not to pull it too tight, as this will give you the incorrect size.
  3. When measuring circumferences (B, C, D, E) it is important to note that the tape measure must remain parallel to the floor. It is sometimes best to take the measurements in front of a mirror; this will help you see the angle of the tape measure.
  4. You will only require the basic body measurements to determine your pattern size which is indicated on our mannequin below:
A. Shoulder Breadth

Place the tape at the edge of the shoulder. Measure along the top of the shoulder blade/across the highest point of the shoulders to the other edge, following the natural slope and allow an extra finger for ease of any movement.

B. Upper Arm Girth

This point is taken as a circumference at your widest point of your upper arm.

C. Bust

This point is taken as a circumference parallel to the floor at the fullest part of your chest.

D. Waist

This point is taken as a circumference and taken at the smallest part of your waist.

E. Hip

This point is taken as a circumference parallel to the floor at the widest part of your hips.

Further information id available on the style arc website 

1.00
Based on 1 review
Write a Review

  1. Hilary Harper

    If you are thinking of buying this pattern – don’t. Instructions for making up are very sparse, not what you would normally expect, but instructions for adding the double hemlines seem to contradict and I cannot for the life of me work it out and have abandoned the garment unfinished at the moment until I can find some professional help to work it out. It could be that I am being particularly dense though!

Add a review

You may also like…